There are four easy-to-learn steps that all operators should bear in mind before starting to use 4 Inch Diamond Core Bit.
First Step:
when drilling with a wet diamond core drill bit, one of the most important factors is water. For best results, operators should apply water until the slurry begins to look like heavily-creamed coffee. This consistency proves to be the most effective when wet core drilling.
Second Step:
The best method of anchoring the drill rig is using physical anchors rated for Diamond Core Bit drilling. In addition, the use of proper tools and techniques to set the anchor will produce optimum results.
Third Step:
Setting a motor to the correct revolutions per minute (rpm) could be the difference between grinding properly and glazing the diamond segments. Many electric core drills have multiple speeds, so an operator is able to use different size core bits and operate them at the appropriate speed.
Fourth Step:
Operators should look to push the drill motor to its maximum rated amperage, but without exceeding it. Exceeding the rated amperage of the motor will result in the motor becoming bogged down, resulting in lower productivity.
4 Inch Diamond Core Bit manufacturer and supplier, if you are interested in 4 Inch Diamond Core Drill Bits, please contact us.
this article is published by China manufacturer and supplier of 4 Inch Diamond Core Bit - Wuxi Yaheng Geological Equipment Technical Co.,Ltd.
article from http://www.yhcorebits.com/tag/4-Inch-Diamond-Core-Bit.htm
No comments:
Post a Comment