4 Inch Diamond Core Bit - China supplier of Diamond Core Bit

There are four easy-to-learn steps that all operators should bear in mind before starting to use 4 Inch Diamond Core Bit.
First Step:
when drilling with a wet diamond core drill bit, one of the most important factors is water. For best results, operators should apply water until the slurry begins to look like heavily-creamed coffee. This consistency proves to be the most effective when wet core drilling.
Second Step:
The best method of anchoring the drill rig is using physical anchors rated for Diamond Core Bit drilling. In addition, the use of proper tools and techniques to set the anchor will produce optimum results.
Third Step:
Setting a motor to the correct revolutions per minute (rpm) could be the difference between grinding properly and glazing the diamond segments. Many electric core drills have multiple speeds, so an operator is able to use different size core bits and operate them at the appropriate speed.
Fourth Step:
Operators should look to push the drill motor to its maximum rated amperage, but without exceeding it. Exceeding the rated amperage of the motor will result in the motor becoming bogged down, resulting in lower productivity.

4 Inch Diamond Core Bit manufacturer and supplier, if you are interested in 4 Inch Diamond Core Drill Bits, please contact us.

this article is published by China manufacturer and supplier of 4 Inch Diamond Core Bit - Wuxi Yaheng Geological Equipment Technical Co.,Ltd.

article from http://www.yhcorebits.com/tag/4-Inch-Diamond-Core-Bit.htm

Diamond Core Bits for Porcelain Tile - China Diamond Core Bits manufacturer

How to use Diamond Core Bits?

Diamond Core Drill Bits used on wood or metal have a sharp metal tip or teeth which cut into the material. These types of Diamond Core Bits do not work on glass, marble, etc. as the tips do not "bite" into the hard material and they create heat build-up which burns up the bit and causes "heat fractures" in the material. Carbide tipped Spear Point steel drills are sometimes used on glass, marble, etc. While they do work, they tend to chip the hard surface very badly, leaving a rough hole and causing breakage due to fractures from the chipping and heat.

The Features of Diamond Core Bits

1. Provide fast speed, less chipping and heat your generation.
2. Applicable to a variety of handheld drill machine or CNC machine tools.
3. More smoother and higher quality finish.
4. Diamond Core Drill Bits are used to drill glass, ceramics, porcelain, ceramic and porcelain tile, limestone, slate, marble, granite, stone, and fiberglass.


China Diamond Core Drill Bits manufacturer, supply Diamond Core Bits for Porcelain Tile. If you are interested in Diamond Core Drill Bits, please contact us.

this article is published by China manufacturer and supplier of Diamond Core Bits for Porcelain Tile - Wuxi Yaheng Geological Equipment Technical Co.,Ltd.

article from http://www.yhcorebits.com/tag/Diamond-Core-Bits-for-Porcelain-Tile.htm

Diamond Core Bits for Concrete - China manufacturer of Diamond Core Bits

Diamond Core Bits (Diamond Core Drill Bits) also known as Diamond Hole Saws, have a hollow center and cut a circle in the material to create a hole. This results in a hole the size of the drill and a smaller "plug" or "core" which comes from the center. Diamond core bits exceptional drilling performance in a wide range of concrete and masonry applications.

The Features of Diamond Core Bits for Concrete

1. Super hard carbide tip with good quality, auto welding with silver material or HF welding.
2. No gaps between the diamond, conventional positioned diamond core drills, cut smoothly.
3. High efficiency, long life, the abrasive on brazed tool is very rarely shedding, usually can be fully utilized to over 70-80% of its own height.
4. Diamond from 32mm-355mm, or other sizes are available.
5. Long Drill, from 300mm-450mm in total length.
6. Diamond Core Bits are good for reinforcement concrete and asphalt and bricks etc.

Wuxi Yaheng Geological Equipment Technical Co.,Ltd. specialized in manufacturing Diamond Core Bits for Concrete. If you are interested in our Diamond Core Drill Bits, welcome to contact us.

this article is published by China manufacturer and supplier of Diamond Core Bits for Concrete - Wuxi Yaheng Geological Equipment Technical Co.,Ltd.

article from http://www.yhcorebits.com/tag/Diamond-Core-Bits-for-Concrete.htm